Industrial Swing Gates Ideal for Commercial and Industrial Settings
Our Manual Swing Gates are suitable for use in warehouses, factories and car parks. The gate can be mounted onto a bollard or any solid surface as a safety barrier to prevent vehicle and pedestrian access to unsafe or unauthorised areas. The nature of this industrial swing gate, requires one person operation to manually open and close the gate to create vehicle and forklift access to areas throughout your business.
Each industrial swing gate is supplied with a 5m aluminium beam finished in Yellow powder coating and hi-vis Red/White reflective panel. Optional steel bollards, receiver posts and wall receivers are available on request.
Features
- Manually operated swing gates.
- Can be mounted to bollards or any solid surface.
- Standard 5 metre rail can be cut down to any length.
- Aluminium rail includes hi-viz reflective panel.
- Optional receiver post available.
- Range of round and square bollards on request.
- Full installation service available.
Technical Specifications
| Description: | Manual pedestrian or vehicle gate. |
| Material: | Galvanised steel assembly with powder coated aluminium rail. |
| Finish: | Powder coated Yellow with reflective. |
| Rail type: | Aluminium extrusion 145 x 40 x 5000mm. |
| Operation: | Push open / push close. |
| Gate swing: | Up to 180 degrees. |
| Gate stop: | Optional receiver post or wall receiver. |
| Max. open: | 5 metres. |
| Min. open: | 2 metres. |
| Adjustment: | Rail length can be cut down on site. |
| Height: | 1000mm. |
| Mounting: | Can be post or wall mounted. |
| Weight: | 35kgs gate assembly with 5 metre rail. |
| PART No. | DESCRIPTION |
| MSG5000 | Manual 5 metre swing gate (bollard not included) |
| C90SM | Surface mount round bollard – 90 x 5 x 1000mm |
| C90BG | Below ground round bollard – 90 x 5 x 1380mm |
| C140SM | Surface mount round bollard – 140 x 5 x 1200mm |
| C140BG | Below ground round bollard – 140 x 5 x 1700mm |
| MSGRK | Additional gate receiver kit |
