The Surface Mount Zephyr is designed for mounting where the surface is not suitable for
deep drilling such as timber decking or sensitive tiled areas. The base plate is a 298mm
diameter x 8mm thick polished 304 stainless steel disc pre-drilled with 11mm mounting
holes and fixings to attach it to the Zephyr body. (Note: ground fixings are not included).
Step 1: With the Zephyr upturned, position the gasket then the stainless steel base
plate over the threaded inserts in the base of the Zephyr. Fix in place with the
4 countersunk fixings supplied.
Step 2: Position the Zephyr as required and mark the 4 holes in the base plate onto
Step 3: Move Zephyr to one side and drill the 4 holes to suit your preferred fixings
(Note: Due to variable installation surfaces these fixings are not supplied with
the surface mount kit).
Step 4: Reposition Zephyr and fix in place.